HOPPER BOTTOM STEEL BINS
Lorrich Hopper Bottom Bins are ideal for grain, fertilizer, beans, or any product that should be in a weather-proof, smooth-wall storage container with total cleanout.
Standard features include:
- Rack-n-pinion discharge gate system
- 24″ discharge gate clearance
- 24″ fill flip lid
- Ladder
| Large Bin Models, 45-degree cone standard (60-degree available) | ||
|---|---|---|
| Model | Capacity | Height |
| 160-35 | 6750 bu (7889 ft3) | 49ft |
| 160-30 | 5851 bu (6884 ft3) | 44ft |
| 160-25 | 5000 bu (5879 ft3) | 39ft |
| 160-22 | 4485 bu (5276 ft3) | 36ft |
| 160-20 | 4143 bu (4876 ft3) | 34ft |
| 160-17 | 3631 bu (4272 ft3) | 31ft |
| 160-15 | 3290 bu (3870 ft3) | 29ft |
| 160-12 | 2778 bu (3268 ft3) | 26ft |
| 160-10 | 2435 bu (2865 ft3) | 24ft |
| 150-25 | 4164 bu (4889 ft3) | 39ft |
| 150-21 | 3590 bu (4224 ft3) | 35ft |
| 150-17 | 3016 bu (3548 ft3) | 31ft |
| 150-15 | 2729 bu (3210 ft3) | 29ft |
| 150-12 | 2300 bu (2703 ft3) | 26ft |
| 150-10 | 2010 bu (2365 ft3) | 24ft |
| 125-17 | 2139 bu (2516 ft3) | 29ft |
| 125-15 | 1930 bu (2271 ft3) | 27ft |
| 125-12 | 1618 bu (1903 ft3) | 24ft |
| 125-10 | 1408 bu (1657 ft3) | 22ft |
| 125-8 | 1200 bu (1412 ft3) | 20ft |
| Small Bin Models - 60-degree cone standard (45-degree available) | ||
|---|---|---|
| Model | Capacity | Height |
| 110-15 | 1200 bu (1468 ft3) | 28ft |
| 110-12 | 1050 bu (1250 ft3) | 25ft |
| 110-10 | 900 bu (1093 ft3) | 23ft |
| 110-8 | 800 bu (935 ft3) | 21ft |
| 110-6 | 650 bu (778 ft3) | 19ft |
| 110-5 | 600 bu (700 ft3) | 18ft |
| 90-15 | 1000 bu (1190 ft3) | 27ft |
| 90-12 | 850 bu (1007 ft3) | 24ft |
| 90-10 | 700 bu (850 ft3) | 22ft |
| 90-8 | 600 bu (747 ft3) | 20ft |
| 90-6 | 500 bu (620 ft3) | 18ft |
| 90-5 | 450 bu (556 ft3) | 17ft |
| 70-15 | 560 bu (689 ft3) | 25ft |
| 70-12 | 465 bu (581 ft3) | 22ft |
| 70-10 | 405 bu (503 ft3) | 20ft |
| 70-8 | 340 bu (425 ft3) | 18ft |
| 70-6 | 278 bu (347 ft3) | 16ft |
| 70-5 | 247 bu (308 ft3) | 15ft |
| 50-6 | 126 bu (425 ft3) | 13ft |
| 50-5 | 89 bu (111 ft3) | 11ft |
| 50-3 | 52 bu (65 ft3) | 9 ft |
BIN OPTIONS & ACCESORIES
- Granular fertilizer bins require a protective interior coating. This coating can wear off due to the abrasiveness of fertilizer. Yearly touch-up inside & outside of bin recommended.
- Skid base system, for no concrete installation. (Lorrich recommends anchoring bin to ground in some way to prevent blowing over of bin when empty, skid bins can also sink into the ground, place bin on firm ground with proper drainage).
- Bottom cone access/inspection ports — 18″ x 24″
- Top cone, roof inspection ports — 18″ diameter
- Pail fill chutes
- Interior sidewall ladders
- 5″ x 5″ bottom cone poke holes for fertilizer
- 2 — 2″ round bottom cone poke holes for fertilizer
- Sight windows — plexi-glass style, round, with rubber gasket
- Crane eyes for crane unloading & lifting for set-up
- Exterior sidewall ladder cage with bin top hand rail
- Work or rest platforms
- Catwalk supports, & catwalks to connect bins in a row
- Roof vents
- Touch-up paint
- Pneumatic fill tubes & vent tubes
- Additional discharge height. Overhead drive thru structures available (up to 3000 bushels)
- Stainless steel hopper bins, stainless steel gate assemblies
- Our rack-n-pinion gates are available for other existing bins
- See other pages for Bean Ladders and aeration systems!
UTILITY AUGERS & MOTORS AVAILABLE
We handle Westfield Utility Augers, which are available in 4″, 8″, or 10″ diameters. We also can supply accessories, including:
- Auger mounting hardware (auger rods, collar, eyes on bin)
- Auger pulleys, Motor pulleys & Belts
- Auger boots
- Dayton single phase & three phase motors are available in sizes from 3 to 10 hp
FREIGHT & SETUP INFORMATION
A legal load is no more than 8′ wide x 13’6″ tall x 75′ long (bumper to bumper). All wide loads require a State permit to travel state highways.
Freight is charged by the mile from our manufacturing shop, with a minimum for local deliveries.
Some states require escort vehicles based on width & height of the load. All escorts are determined by the state providing the permit, not Lorrich.
When it is determined that we cannot unload a bin with our hydraulic trailers, then a crane is required. We install crane eyes on our bins so there is a safe place to lift. All crane costs & arrangements are paid for and covered by the customer. They are not included in the per mile delivery rate.
Lorrich drivers install one anchor bolt per leg when they set-up a bin on your yard, we use 5/8 x 6″ anchor bolts. Unless weather doesn’t permit it, our drivers are to touch-up any scratches due to set-up (the load securing chains or binder scratches). Lorrich drivers are NOT allowed to install augers or wire up any electric motor or fan. Lorrich drivers usually require assistance to lift & install all safety cages. If assistance is provided they can try to install the safety cages before the bin is unloaded.
Contact us today...
Business Hours:
Monday – Thursday: 7:00am – 4:30pm
Friday: 7:00am – 12:00pm
Closed Saturday & Sunday
Phone: (701) 549-3333
Email: info@lorrich.com
Come visit us at:
9265 State Hwy 89
Cavalier, ND 58220