Model GG 9000-18" dia. removable tube type system.
The above system is designed to use a 18" round fan
Model GG 7000-4' 30" dia. rocket air system.
Model GG 7000-6' 30" dia. rocket air system.
The above systems come standard with a 9" x 14" air inlet. We do have adaptors to go from 9 " x 14" to 18" or 24" round. Fan stands are available for supporting aeration fans.
All Size Aeration.
Aeration panel system -- includes 18" round fan inlet & inlet cover 4' x 8' galvanized perforated air panel.
Lorrich does not manufacture the above aeration systems, we install them only.
Some systems can be installed in existing hopper bins, call for details.
Gooseneck roof vents are available, these are 11.5" x 11.5" with bird screen.
Bean Ladders available
6" x 6" -- 1000 bushel per hour approx. flow 8" x 8" -- 1500 bushel per hour approx. flow 10" x 10" -- 2000 bushel per hour approx. flow 12" x 12" -- 3000 bushel per hour approx. flow
The above bean ladders are manufactured and installed, by Lorrich Industries. The bean ladders are all metal construction, hanging type of ladder. Roof stiffners are recommended. Lorrich also recommends roof vents, with bean ladders. Lorrich will build bigger sizes if required.
Bin Options and Accessories available
Granular fertilizer bins require a protective interior coating. This coating can wear off due to the abrasiveness of fertilizer. Yearly touch-up inside & outside of bin recommended. Skid base system, for no concrete installation. (Lorrich recommends anchoring bin to ground in some way to prevent blowing over of bin when empty, skid bins can also sink into the ground, place bin on firm ground with proper drainage).
Bottom cone access/ inspection ports -- 18" x 24" Top cone, roof inspection ports -- 18" diameter
Pail fill chutes
Interior sidewall ladders
8" x 8" bottom cone poke holes for fertilizer 2 -- 2" round bottom cone poke holes for fertilizer
Sight windows -- plexi-glass style, round.
Crane eyes for crane unloading & lifting for set-up.
OSHA top cage system, 7' dia x 42" tall with hand railing. OSHA exterior ladder cage system, connects to top cage hand rails. OSHA rest platforms.
Catwalk supports, & catwalks to connect bins in a row.
Auger mounting kits (auger rods, collar, eyes on bin) available.
Dayton single phase & three phase motors are available (3 to 10 hp).
Motor pulleys are available.
Lorrich Freight information sheet.
A legal load is no more than 8' wide x 13'6" tall x 75' long (bumper to bumper).
All freight is figured form our manufacturing shop located by Concrete, NDak. Freight is charge by the mile, with a minimum for local delvieries.
All wide loads require a State permit to travel state highways.
Some states require escort vehicles based on width & height of the load. So escorting can be done by the customer, some require police if going through heavy traffic areas. All escorts are determined by the state providing the permit, not Lorrich.
Crane bins, when it is determined that we cannot unload a bin, with our hydralic trailers, then a crane is required. We install crane eyes on our bins so there is a safe place to lift. All crane costs & arrangements are paid for and covered by the customer. They are not included in the per mile delivery rate.
Drivers, Lorrich drivers install one anchor bolt per leg when they set-up a bin on your yard, we use 5/8 x 6" anchor bolts. Unless weather doesn't permit it, our drivers are to touch-up any scratches due to set-up (the load securing chains or binder scratches). Lorrich drivers are NOT allowed to install augers or wire up any electric motor or fan. Lorrich drivers usually require assistance to lift & install all safety cages. If assistance is provided they will install the safety cages before the bin is unloaded.